LANsense - Intelligent Infrastructure Management (IIM)

Nexans is the leading provider of IIM solutions with over a million installed ports. LANsense extends IT operational efficiency to the physical layer by automatically mapping, locating, reporting and alerting on any network ‘event’, whether this is connection/disconnection of a device or a physical change to the infrastructure.

LANsense delivers true cost of ownership savings by helping to manage change in a variety of environments from moves/adds/changes in Enterprise, supporting 24/7 operations in Data Centres, or managing Converged IP Networks.

Analysers and Cards

The LANsense system analysers 1U (256 port) and 6U (up to 2048 port) are designed for use in standalone or multiple (cascaded) configurations. Up to 10 x 6U analysers can be cascaded, monitoring over 20,000 ports, that are supported by a single IP address.

bigger photo	LANsense Link Analyser 1U 256 Port Manufacturer Ref: (Nexans) Part No: ITT-LS-LA1U
	POA	please call for price

bigger photo	LANsense Standalone Analyser 1U 256 Port Manufacturer Ref: (Nexans) Part No: ITT-LS-SA1U
	POA	please call for price

bigger photo	LANsense Master Analyser 1U 256 Port Manufacturer Ref: (Nexans) Part No: ITT-LS-MA1U
	POA	please call for price

bigger photo	LANsense Link Analyser 6U 512 Ports (Expandable) Manufacturer Ref: (Nexans) Part No: ITT-LS-LA6U
	POA	please call for price

bigger photo	LANsense Standalone Analyser 6U 512 Ports (Expandable) Manufacturer Ref: (Nexans) Part No: ITT-LS-SA6U
	POA	please call for price

bigger photo	LANsense Master Analyser 6U 512 Ports (Expandable) Manufacturer Ref: (Nexans) Part No: ITT-LS-MA6U
	POA	please call for price

	256 Port I/O Expansion Card Manufacturer Ref: (Nexans) Part No: ITT-LS-EP
	POA	please call for price

	Extractor Tool for 256 Port I/O Card Manufacturer Ref: (Nexans) Part No: ITT-LS-XTOOL
	POA	please call for price

top of page

Patch Panels

LANsense copper and fibre patch panels carry on-board intelligence which remains dormant until enabled by LANsense analysers and software. The panels have in built sensors to detect the connection status of each port and an I/O connector to link to the analysers. The range of panels allow for housing of 808 or EVO style copper connectors and LC, SC or MT-RJ fibre adaptors. Upgrades to LANsense from standard panels, where available, are shown on the relevant pages. * Copper panels are supplied without connectors which must be purchased separately.

	LANsense 808 Patch Panel 24 Port Manufacturer Ref: N881.001 (Nexans) Part No: 195513-1001
	POA	please call for price

	LANsense Voice Patch Panel 24 Port Manufacturer Ref: N881.041 (Nexans) Part No: ITT-LSVPAN24
	POA	please call for price

bigger photo	LANsense 808 Modular Patch Panel 24 Port Manufacturer Ref: N881.051 (Nexans) Part No: NE881.051
	POA	please call for price

bigger photo	LANsense EVO Drawer Style Patch Panel 24 Port Manufacturer Ref: (Nexans) Part No: NE881.411
	POA	please call for price

bigger photo	LANsense LC Duplex Multimode Fibre Patch Panel 48 Port Manufacturer Ref: (Nexans) Part No: NE883.223
	POA	please call for price

bigger photo	LANsense SC Duplex Fibre Patch Panel 12 Port Manufacturer Ref: (Nexans) Part No: ITT-LSSCPAN12D
	POA	please call for price

	LANsense MTRJ Duplex Fibre Patch Panel 24 Port Manufacturer Ref: (Nexans) Part No: ITT-LSMTPAN24
	POA	please call for price

top of page

Category 5e UTP Patch Leads

The patchcords have an unobtrusive external Probe built into the plug boot which mates with the sensors built into the patch panels. Grey PVC with blue boots.

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 1m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC1
	POA	please call for price

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 10m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC10
	POA	please call for price

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 2m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC2
	POA	please call for price

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 3m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC3
	POA	please call for price

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 5m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC5
	POA	please call for price

bigger photo	LANsense at 5e UTP PVC Patch Lead Grey with Blue Boots 7m Manufacturer Ref: (Nexans) Part No: ITT-LS-U5-PC7
	POA	please call for price

top of page

Category 5e F/UTP Patch Leads

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 1m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC1
	POA	please call for price

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 10m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC10
	POA	please call for price

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 2m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC2
	POA	please call for price

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 3m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC3
	POA	please call for price

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 5m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC5
	POA	please call for price

bigger photo	LANsense at 5e F/UTP PVC Patch Lead Grey with Blue Boots 7m Manufacturer Ref: (Nexans) Part No: ITT-LS-F5-PC7
	POA	please call for price

top of page

OM3 Fibre Patch Leads

OM3 fibre patchcords are available with LC, SC or MTRJ connectors. The patchcords have an unobtrusive external Probe built into the plug boot which mates with the sensors built into the patch panels.

	LANsense LC Duplex OM3 Fibre Patch Lead 1m Manufacturer Ref: (Nexans) Part No: NE884.5LLP1
	POA	please call for price

	LANsense LC Duplex OM3 Fibre Patch Lead 2m Manufacturer Ref: (Nexans) Part No: NE884.5LLP2
	POA	please call for price

	LANsense LC Duplex OM3 Fibre Patch Lead 3m Manufacturer Ref: (Nexans) Part No: NE884.5LLP3
	POA	please call for price

	LANsense LC Duplex OM3 Fibre Patch Lead 5m Manufacturer Ref: (Nexans) Part No: NE884.5LLP5
	POA	please call for price

	LANsense SC Duplex OM3 Fibre Patch Lead 1m Manufacturer Ref: (Nexans) Part No: ITT-LS-SC1D
	POA	please call for price

	LANsense SC Duplex OM3 Fibre Patch Lead 2m Manufacturer Ref: (Nexans) Part No: ITT-LS-SC2D
	POA	please call for price

	LANsense SC Duplex OM3 Fibre Patch Lead 3m Manufacturer Ref: (Nexans) Part No: ITT-LS-SC3D
	POA	please call for price

	LANsense SC Duplex OM3 Fibre Patch Lead 5m Manufacturer Ref: (Nexans) Part No: ITT-LS-SC5D
	POA	please call for price

	LANsense MTRJ Duplex OM3 Fibre Patch Lead 1m Manufacturer Ref: (Nexans) Part No: ITT-LS-MT1D
	POA	please call for price

	LANsense MTRJ Duplex OM3 Fibre Patch Lead 2m Manufacturer Ref: (Nexans) Part No: ITT-LS-MT2D
	POA	please call for price

	LANsense MTRJ Duplex OM3 Fibre Patch Lead 3m Manufacturer Ref: (Nexans) Part No: ITT-LS-MT3D
	POA	please call for price

	LANsense MTRJ Duplex OM3 Fibre Patch Lead 5m Manufacturer Ref: (Nexans) Part No: ITT-LS-MT5D
	POA	please call for price

top of page

LANsense I/O Cables

The LANsense I/O cables come in a 24-wire configuration with two distinct connectors. One connector is a dual pin configuration to connect to the analyser. The other is a flat quick clip connector to connect to the sensor strip on the patch panel.

bigger photo	LANsense 24 Way I/O Cable Type 2 1.9m Manufacturer Ref: (Nexans) Part No: 196102-0019
	POA	please call for price

bigger photo	LANsense 24 Way I/O Cable Type 2 2.8m Manufacturer Ref: (Nexans) Part No: 196102-0028
	POA	please call for price

bigger photo	LANsense 24 Way I/O Cable Type 2 4.3m Manufacturer Ref: (Nexans) Part No: 196102-0040
	POA	please call for price

bigger photo	LANsense 24 Way Extension Cable Male Adapter 15.2m Manufacturer Ref: (Nexans) Part No: ITT-LS-EC152
	POA	please call for price

bigger photo	LANsense 24 Way Extension Cable Male Adapter 4.3m Manufacturer Ref: (Nexans) Part No: ITT-LS-EC43
	POA	please call for price

bigger photo	LANsense 24 Way Extension Cable Male Adapter 7.6m Manufacturer Ref: (Nexans) Part No: ITT-LS-EC76
	POA	please call for price

top of page

Original (Type 1) LANsense I/O Cables

Required for SC, MTRJ and voice panels, plus all panels purchased prior to October 2004. Please contact our sales team to confirm requirements.

bigger photo	*LANsense 24 Way I/O Cable Type 1 2.1m** Manufacturer Ref: (Nexans) Part No: ITT-LS-AP21
	POA	please call for price

bigger photo	*LANsense 24 Way I/O Cable Type 1 3m** Manufacturer Ref: (Nexans) Part No: ITT-LS-AP30
	POA	please call for price

bigger photo	*LANsense 24 Way I/O Cable Type 1 4.3m** Manufacturer Ref: (Nexans) Part No: ITT-LS-AP43
	POA	please call for price

top of page

Master Link Cables

The Link Cables are used to connect the Link Analyser(s) to the Master Analyser.

bigger photo	LANsense Analyser Master Link Cable 16m Manufacturer Ref: (Nexans) Part No: ITT-LS-ML16
	POA	please call for price

bigger photo	LANsense Analyser Master Link Cable 3m Manufacturer Ref: (Nexans) Part No: ITT-LS-ML3
	POA	please call for price

bigger photo	LANsense Analyser Master Link Cable 4m Manufacturer Ref: (Nexans) Part No: ITT-LS-ML4
	POA	please call for price

bigger photo	LANsense Analyser Master Link Cable 8m Manufacturer Ref: (Nexans) Part No: ITT-LS-ML8
	POA	please call for price

top of page | back to previous page