Fibre Optic Accessories

Cable Entry Glands

For use with patch panels and wall mounting cases. Made from glass filled polycarbonate. Glands are supplied with locknuts.

bigger photo	Cable Entry Gland for Cable 4mm-8mm O/D Grey Manufacturer Ref: () Part No: M16G
	£0.82

	Cable Entry Gland for Cable 4mm-8mm O/D Grey with Strain Relief Manufacturer Ref: () Part No: M16GSR
	£1.02

bigger photo	Cable Entry Gland for Cable 4mm-8mm O/D Black with Strain Relief Manufacturer Ref: () Part No: M16BSR
	£1.07

	Cable Entry Gland for Cable 6mm-10mm O/D Grey with Strain Relief Manufacturer Ref: () Part No: M20GSR
	£1.25

	Cable Entry Gland for Cable 6mm-10mm O/D Black with Strain Relief Manufacturer Ref: () Part No: M20BSR
	£1.34

top of page

Fibre Retention Clips

Moulded nylon clips with self adhesive base for use within patch panels and wall mounting cases. The clips are used to retain the fibres in position without inducing stresses.

bigger photo	Nylon Clips 27mm High (Pack 10) Manufacturer Ref: () Part No: FRC27
	£2.62

top of page

Aluminium Oxide Lapping Films

Aluminium Oxide lapping films are suitable for wet or dry polishing of fibre optic connectors.
Size: 230 x 280mm
Supplied in packs of 10.

bigger photo	Pack 10 Aluminium Oxide Lapping Films White (0.3μm) Manufacturer Ref: () Part No: LF-03
	£10.00

top of page

Diamond Lapping Films

Diamond lapping film for imProved final polishing of fibre optic connectors.
Size: 230 x 280mm
Supplied as a single sheet.

	Diamond Lapping Sheet Pink (3.0 μm) Manufacturer Ref: () Part No: LFD-30
	£36.72

top of page

Glass Polishing Plate

bigger photo	Glass Polishing Plate 300mm x 250mm Manufacturer Ref: () Part No: PP-01
	£9.97

bigger photo	Glass Polishing Plate 250mm x 180mm Manufacturer Ref: () Part No: PP-02
	£9.44

top of page

Cold Cure Adhesive

LOCTITE 638 is an anaerobic adhesive which develops high strength rapidly when used with LOCTITE 7649 Activator. The curing time when used together is nominally 20 seconds.

bigger photo	Loctite 638 Anaerobic Adhesive 50ml Manufacturer Ref: 638 (Loctite) Part No: 638
	£38.39

bigger photo	Loctite 7649 Activator Spray 150ml Manufacturer Ref: 7649 (Loctite) Part No: 7649
	£9.34

top of page

Syringes

Disposable syringe and needle for application of epoxy. Syringe has 2ml capacity with 0.1ml graduations. Needle has 25mm long tip.

bigger photo	Disposable Syringe (Pack 10) Manufacturer Ref: () Part No: ES-2
	£1.68

	Disposable Needle (Pack 10) Manufacturer Ref: () Part No: SN-2
	£3.36

top of page

IPA Solvent Dispenser

Pump action, polyethylene solvent dispenser holds up to 80cc of cleaning fluid. Supplied with stainless steel locking cap to prevent evaporation or leaking of solvent when carried in a termination kit.
IPA (IsoPropyl Alcohol) cleaning solvent supplied in 500ml plastic bottle.

bigger photo	Solvent Dispenser Manufacturer Ref: () Part No: MA-50
	£20.20

	IPA Solvent (500ml) Manufacturer Ref: () Part No: IPA-500
	£6.82

top of page

Splice Protectors

Heat shrink plastic, available in 10 different colours. ApProved to BT standard. Supplied in packs of 10.

bigger photo	Splice Protectors (Pack 10) Manufacturer Ref: Black () Part No: SP-3A-0
	£2.83

bigger photo	Splice Protectors (Pack 10) Brown Manufacturer Ref: () Part No: SP-3A-1
	£2.83

bigger photo	Splice Protectors (Pack 10) Clear Manufacturer Ref: () Part No: SP-3A-10
	£2.83

bigger photo	Splice Protectors (Pack 10) Red Manufacturer Ref: () Part No: SP-3A-2
	£2.83

bigger photo	Splice Protectors (Pack 10) Orange Manufacturer Ref: () Part No: SP-3A-3
	£2.83

bigger photo	Splice Protectors (Pack 10) Yellow Manufacturer Ref: () Part No: SP-3A-4
	£2.83

bigger photo	Splice Protectors (Pack 10) Green Manufacturer Ref: () Part No: SP-3A-5
	£2.83

bigger photo	Splice Protectors (Pack 10) Blue Manufacturer Ref: () Part No: SP-3A-6
	£2.83

bigger photo	Splice Protectors (Pack 10) Violet Manufacturer Ref: () Part No: SP-3A-7
	£2.83

bigger photo	Splice Protectors (Pack 10) Grey Manufacturer Ref: () Part No: SP-3A-8
	£2.83

bigger photo	Splice Protectors (Pack 10) White Manufacturer Ref: () Part No: SP-3A-9
	£2.83

top of page

Splice Protector Holders

Moulded plastic splice Protector holders with self adhesive base. The 24 way holder is supplied with a clip on lid and identification label.

bigger photo	Splice Protector Holder 24 Way Manufacturer Ref: () Part No: SBK24
	£6.82

bigger photo	Splice Protector Holder 4 Way Manufacturer Ref: () Part No: SBK4
	£2.62

top of page

Safety Waste Bin

The container conforms to BS720 and is used for safe storage and disposal of optical fibre bits, used epoxy sachet, syringes, needles and alcohol impregnated optical wipes. The 645ml pack has a hinged clip-on lid and should be incinerated when full.

bigger photo	Sharpak Safety Waste Bin Manufacturer Ref: () Part No: BS-6
	£6.00

top of page

Optic Wipes

These soft, non-abrasive, 100% lint free tissues are excellent for cleaning optical surfaces. The wipes have high wet strength and absorbency (8 x weight), are solvent resistant and static free.
Size: 230 x 230 mm.
Supplied in pack of 200.

bigger photo	Optic Wipes (Pack 200) Manufacturer Ref: () Part No: OW-200
	£5.19

top of page

Tweezers & Cotton Buds

For use with IPA solvent to clean optical fibres prior to application of epoxy adhesive.

bigger photo	Tweezers Manufacturer Ref: () Part No: TW-5
	£9.44

	Cotton Buds (Pack 50) Manufacturer Ref: () Part No: CB-50
	£1.26

top of page

Miller Strippers

Industry standard tool for stripping 250μm coating from 125μm optical fibre.

bigger photo	Miller Strippers Manufacturer Ref: () Part No: 103S
	£41.86

top of page

NO-NIK Fibre Stripping Tool

For easy, fast stripping of primary and secondary coatings from 125μm fibre. Plastic heads make contact only with the insulation to centre and support the fibre while back-up cutting blades remove the coatings.

bigger photo	125μm Stripping Tool Manufacturer Ref: () Part No: NN152
	£36.72

top of page

Kevlar Scissors

Self sharpening scissors for cutting through Kevlar strength members.

bigger photo	Kevlar Scissors Manufacturer Ref: () Part No: 501014-1
	£20.93

top of page

Pen Cleaver

Synthetic sapphire fibre optic scribe with 60° polished cutting edge for cleaving of fibre on cured connectors. The microscopic scratch causes a clean break across the optical fibre when tension is applied.

bigger photo	Fibre Optic Scribe Manufacturer Ref: () Part No: FOS-01
	£36.72